Your search gave no results…

Lift tables and lifting solutions

    Your search gave no results…

    Categories

      Your search gave no results…

      Pages

        Your search gave no results…

        Case studies

          Your search gave no results…

          Accessories - Work Positioners

          To gain the full value of our Work Positioner a wide range of accessories are available. On this page there are illustrations of the most common accessories that we can equip our WP-trolleys with.

          Accessories - Work Positioners
          • Accessories
          Popular products


          desc
          Wooden platform

          Platform in marine plywood, standard platform for WP ONE. Measurements: length 434 mm, width 418 mm.

          Platform in painted aluminium

          Standard platform for WP 130 and WP 200. Measurements: length 500 mm, width 500 mm, available in other dimensions.

          Platform in painted steel

          Measurements: length 500 mm, width 500 mm, available in other dimensions.

          Platform in stainless steel

          Measurements: length 500 mm, width 500 mm, available in other dimensions.

          Reel mandrel

          Length 500 mm, 40x40 mm, available in other dimensions.

          Twin mandrel

          Length 500 mm, c-c 350 mm, available in other dimensions.

          Lifting fork

          Internal measurements: length 600, width 375 mm, available in other dimensions.

          Lifting fork KLT

          For KLT containers with narrow receiving edge. Internal measurements: length 585 mm, width 375 mm.

          Plastic platform

          Platform in PEHD, standard platform for WP 70 SS and WP 90 SS. Measurements: length 495 mm, width 495 mm. Available in other dimensions.
           

          Plastic platform with 3 load rollers

          Platform in PEHD with load rollers on all sides of the platform. Measurements: length 495 mm, width 495 mm.

          Wooden platform with 3 load rollers

          Platform in marine plywood with load rollers on all sides of the platform. Measurements: length 500 mm, Width 500 mm.
           

          Reel mandrel with front roller and V-cradle

          The V-cradle is rotatable and can easily be removed. When the V-cradle is attached the tool can handle reels up to ∅600 mm. Load capacity up to 60 kg

          Stainless steel platform + V-cradle

          Rotatable V-cradle in PEHD, LxWxH 340x290x80 mm. Stainless steel platform, LxW 500x400 mm. Max width of reel ∅600 mm. Load capacity 90 kg

          Fixed V-cradle

          Used for handling long reels. Length: 400 mm, width: 700 mm.

          Jib arm

          Length 600 mm, lift capacity varies depending on load’s position, available in other dimensions.

          Quick release bracket

          If you have two or more tools then this is the right option for you! Rather than using time consuming screw in fixings this options allows you to change tools in seconds.

          The bracket for WP 70 has another design.

          Reel handler in stainless steel with +-15° swing

          The Reel handler is used for handling reels with 3” (76 mm) core, commonly stretch film to be loaded into machines. The reel can be picked up directly from the floor or a pallet and then be rotated 90°. The tool is equipped with a security clutch preventing the reel from being dropped accidently. Depending on Work Positioner the tool handles weights up to 100 kg, adjustable sideways +- 15°.

          Reel handler with motorised expansion and rotation

          Fully electric reel handler for handling reels with 3” (76 mm) core, commonly stretch film to be loaded into machines. The reel can be picked up directly from the floor or a pallet and then be rotated 90°. All expansion and release commands requires two buttons to be pressed at once as a safety precaution. Depending on Work Positioner the tool handles weights up to 200 kg.
           

          Mandrel enlarger

          Used in combination with reel handlers. Available in two sizes, for reels with 6” (152 mm) core and for reels with 10” (254 mm) core. The mandrel enlarger is designed for quick mounting and un-mounting.

          Bucket and drum handler

          Lifts odd size drums, buckets and cans, min Ø200 mm, max Ø400 mm. Can also handle square items depending on the specific object. Automatic retracting lashing strap which is tightened by pulling the handle by the lashing strap. Rotation 360° with adjustable interval of 30° or 90°. Lift capacity 50 kg.

          Canister tipper 25 liter

          Designed for standard size 15, 20 and 25 liter canisters. The canister is attached to the carrying handle with a hook. Lifts and rotates the canister to empty its content. Rotation 360° with adjustable interval of 30° or 90°. Lift capacity 40 kg.

          Canister tipper 60 liter

          Designed for standard size 60 liter canisters. The canister is attached to the carrying handle with a hook. Lifts and rotates the canister to empty its content. Rotation 360° with adjustable interval of 30° or 90°. Lift capacity 80kg.

          Flex unit base

          The two sledges are steplessly adjustable to fit the width of the object that needs t be handled. Reel mandrels, lifting forks and crane arms are mounted on the base unit, not included in the price. Max. width 588 mm, min. width 210 mm. Lift capacity 100 kg.

          Manual turning unit

          Makes fixed tools rotatable. Rotation 360° with adjustable interval of 30° or 90°. Desired tool is mounted on the turning unit, not included in the price. Lift capacity 60 kg.

           

          Control unit with buttons in handle

          The handle is adjustable in height for best ergonomics.

          Control unit with spiral cable

          Control unit with spiral cable gives better access and control for the operator when there is need of operate the Work Positioner from the side or in front of the load. Dual speed 125 and 60 mm/second.

          Drum turner with motorised grip and turning

          Full electric drum turners for handling drums and other object to be lifted and rotated. Available in models for tipping or turning and with different grippers. All grip and release commands requires two buttons to be pressed at once as a safety precaution. Handles weights up to 150 kg.

          Exchangeable battery with charger station

          Exchangeable battery is used where there’s no time waiting for the Work Positioner to be charged. The batteries can be changed quickly, includes a wall mounted charger station and two batteries.

          Marking arrow with stickers

          Used for quick height indication, the arrow is fitted on the sledge and the stickers on the mast.

          X
          X
          X