Your search gave no results…

Products

    Your search gave no results…

    Categories

      Your search gave no results…

      Pages

        Your search gave no results…

        Case studies

          Your search gave no results…
          • Specifications
          • Product information
          • Accessories
          Model WP 90 Q
          Art. No. 87671
          Capacity 90 kg
          Platform max height 1702 mm
          Lowest height 110 mm
          Length 848 mm
          Width 534 mm
          Height 1920 mm
          Platform length 500 mm
          Platform width 500 mm
          Lifting time 125/270 mm/sec
          Battery 24V/9Ah
          Charger 2A/24V
          Weight pack. incl. 45 kg

          Work Positioners

          Work Positioners operate with loads of up to 300 kg. Weight distribution is spread evenly over all four wheels and with the unit’s short wheelbase and light weight the Work Positioner is the safest and most maneuverable lifter on the market! A Work Positioner is an instant improvement in the working environment resulting in greater profitability for your company.

          Charger
          The charger cannot overcharge the battery using an auto-cut-off function. The unit is suitable for most worldwide voltages.

          Perfect weight distribution
          Due to the lifting mast positioning at the rear of the chassis, EdmoLift's Work Positioner has near perfect weight distribution, providing unrivalled maneuverability. The 100% vertical mast eliminates problems such as platform drift found on other products.

          Compact design
          The Work Positioner features an extremely compact design which is also very easy to clean.

          Leg frames
          All models can be equipped with a variety of different leg frames and also with wider or more narrow legs. Some models come with adjustable legs. 

           

           Product features

          • One- or two-speed function for elevation and descent (depending on model).
          • Battery charger with auto-cut-of-function.
          • Easily customised for your specific requirements - higher lift heights, wider leg frames etc.
          • Wide range of tools and options such as platforms, reel handlers, v-cradles, control units and leg frames.
          • IP66 models.
          • Fastest lifting speed on the market – 125 and 270 mm/second.
          • Load centre 400 mm.
          Wooden platform

          Platform in marine plywood, standard platform for WP 70, WP 80, WP 90, WP 90 Q and WP 130. The platform is available in different sizes up to 600x600 mm.

          Wooden platform with 3 load rollers

          Platform in marine plywood with load rollers on all sides of the platform. Measurements: length 500 mm, Width 500 mm.
           

          Plastic platform

          Platform in PEHD, the platform is available in different sizes up to 600x600 mm. Standard platform for WP 70 SS and WP 90 SS.
           

          Plastic platform with 3 load rollers

          Platform in PEHD with load rollers on all sides of the platform. Measurements: length 495 mm, width 495 mm.

          Stainless steel platform

          The platform is available in different sizes up to 600x600 mm. Standard platform for WP 200, WP 200 SS and WP 300 SS.

          Jib arm with lifting hook

          Available in 600 mm and 800 mm length with or without swing +- 15°.

          Lifting fork

          Commonly used for lifting boxes, available in different sizes.

          Stainless steel platform + V-cradle

          Rotatable V-cradle in PEHD, LxWxH 340x290x80 mm. Stainless steel platform, LxW 500x400 mm. Max width of reel ∅600 mm.

          Reel mandrel

          Available in two different lengths, 500 and 800 mm.

          Twin mandrel

          Available in different lengths and widths.

          Reel mandrel with front roller and V-cradle

          The V-cradle is rotatable and can easily be removed. When the V-cradle is attached the tool can handle reels up to ∅600 mm.

          Fixed V-cradle

          Used for handling long reels. Length: 400 mm, width: 700 mm.

          Reel holder

          The reel holder is used for moving around reels in its vertical position, the tool cannot be rotated.
           

          Reel handler

          The Reel handler is used for handling reels with 3” (76 mm) core, commonly stretch film to be loaded into machines. The reel can be picked up directly from the floor or a pallet and then be rotated 90°. The tool is equipped with a security clutch preventing the reel from being dropped accidently. Depending on Work Positioner the tool handles weights up to 40 kg.

          Reel handler in stainless steel with +-15° swing

          The Reel handler is used for handling reels with 3” (76 mm) core, commonly stretch film to be loaded into machines. The reel can be picked up directly from the floor or a pallet and then be rotated 90°. The tool is equipped with a security clutch preventing the reel from being dropped accidently. Depending on Work Positioner the tool handles weights up to 100 kg, adjustable sideways +- 15°.

          Marking arrow with stickers

          Used for quick height indication, the arrow is fitted on the sledge and the stickers on the mast.

          Flex leg frame

          Leg frame with central break and adjustable width.

          1. Width adjustable in 5 positions, +40 mm between each step.

          2. Front wheel options: Ø50 mm double swivel, Ø75 mm double swivel or Ø80 mm fixed.

          3. Length: 500, 650 or 850 mm.

          4. Central brake with 3 states: swivel wheels, fixed wheels and brake.

          Centre leg frame

          Leg frame with a narrow leg in the center, available in length 450 mm or 600 mm.

          Mandrel enlarger

          Used in combination with reel handlers. Available in two sizes, for reels with 6” (152 mm) core and for reels with 10” (254 mm) core. The mandrel enlarger is designed for quick mounting and un-mounting.

          Exchangeable battery with charger station

          Exchangeable battery is used where there’s no time waiting for the Work Positioner to be charged. The batteries can be changed quickly, includes a wall mounted charger station and two batteries.

          Quick release bracket

          If you have two or more tools then this is the right option for you! Rather than using time consuming screw in fixings this options allows you to change tools in seconds.

          X
          X
          X