Accessories - Scissor Lift Tables

Provided with wheels the lift platform becomes a mobile. The trolley frame consists of two swivel braked caster wheels and two fixed wheels.
 

Enables the lift table to be easily transported with a forklift or hand pallet truck.
 

Non slip, non rust surface.
 

The tear plate platform minimizes the risk for cargo to slip from the table surface. The tear plate platforms are recommended for tables located outdoors.
 

The limit switch is adjustable and stops the lift at a pre-set height. Select the upper or lower limit, and whether there should be a function for passing the limit.
 

For bridging the gap between the lift table and loading dock or vehicle. Hydraulic operated. This option is mainly used on lorry loaders.
 

For bridging the gap between the lift table and loading dock or vehicle. Manually operated. This option is mainly used on lorry loaders.
 

Used to fix and remove load from the table when it is driven over in the bottom position and when adjusting the height to meet roller belts.
 

A 1100 mm high rail with a mid-rail and a 150 mm high toe kick-plate is a recommended option when the lift table is used by persons or as a goods lift between levels.
 

It is usually combined with the barrier rails and can be supplied with either electrical or mechanical locking or both.
 

Fully protected, a remote power pack makes access for servincing easy.
 

Provides extra protection in exposed environments. Also provides protection if there is a risk for falling objects hitting the power pack.
 

A very good solution when you must have both hands free.
 

Makes installation, transportation easier and safer. Some units requrire a larger platform. *Some units requrire a larger platform.

The circular turntable is a great accessory to add to your EdmoLift lift table as it makes the handling of an object much easier and ergonomic. With the circular turntable, the operator rarely has to move as it is possible to rotate an object 360 degrees. However, the turntable has four positional locks (holes) that makes it possible to fixate the turntable in four different positions. The circular turntable is either recessed or integrated in the lift table top. The circular turntable can also be delivered as recessed into a secondary table top, which is fitted and leveled to the main scissor lift platform.

Fitted on the lift table top and includes an inductive sensor to avoid trapping risks. Rectangular surface bolted to the main scissor lift platform. The unit has safety spacing and electro-interlocked to the lift travel to reduce the risk of trapping an operator.
 

Roller conveyor or another conveyor type is often utilised in production systems where different levels need to be reaced. *Always state the goods length and weight for the best solution.
 

Free standing, smoth surface. Ensure gradient is suitable for your load.
 

Free standing, smoth surface. Ensure gradient is suitable for your load.
 

Level differences in a track bound transportation system can be simply eliminated by utilising a flange wheel base frame. This equipment can be supplied with or without powered drive unit. The easiest way to cope with a difference in level in a track bound transportation system is to equip a lifting table with flanged wheels. The base can be an unpowered bogie or can be fitted with a drive unit for self-propulsion.
 

Gives additional support to the table. Also includes mechanical stops in base frame.
 

Helps to stabilize the lift table. Minimizes the risk for the lift table to hinge upward. The accessory is recommended if the platform extension is over 10 %!

Protects the table from dust, dirt and debris in exposed environments. The lift table can be enclosed in a chain mesh curtain to reduce the risk of injury or entrapment. The chain mesh curtain is also a useful protection against mechanical damage. *Requires an extended platform +75 mm on each side for fitting.

The bellows are suitable for weather proofing the equipment in an outdoor environment. *Requires an extended platform +75 mm on each side for fitting.

The skirt are suitable for weather proofing the equipment in an outdoor environment. *Requires an extended platform +75 mm on each side for fitting.

Provides access to the power pack when the lift table is fully closed.
 

Designed to prevent accidential roll off from the platform when the table starts to elevate. *Demands extension of the platform length +150 mm.
 

Fitted with additional features for tables intended for intensive operation.
 

Secure a platform that can be lowered below floor level. When the platform is secured to the ground it can take heavy loads and even be run over by other vehicles.

Automatic lifting and lowering of the lift table.

Consists of two units, one for audio and one for light. The operator can easily remove and refit the various modules, as well as adjust each of the signals, to suit the specific environment.

In a rigid and durable wooden casing, in order to allow multiple handling and a safe arrival of the goods. Our product packaging is also available in a “classified version“ in compliance with ISPM 15.