Truck handling chassis
Enables the lift table to be easily transported with a forklift or hand pallet truck.
Tear plate platform
The tear plate platform minimizes the risk for cargo to slip from the table surface. The tear plate platforms are recommended for tables located outdoors.
Limit switch
Stops lift at pre-set height, fully adjustable.
Loadflap manual
For bridging the gap between the lift table and loading dock or vehicle. Manually operated. This option is mainly used on lorry loaders.
Loadflap hydraulic
For bridging the gap between the lift table and loading dock or vehicle. Hydraulic operated. This option is mainly used on lorry loaders.
Mechanical stops
For installations where the platform is flush with the floor or ground in the raised position, the table can be equipped with heavy-duty bolts capable of withstanding severe loading.
Guard rail
A 1100 mm high rail with a mid-rail and a 150 mm high toe kick-plate is a recommended option when the lift table is used by persons or as a goods lift between levels.
Guard rail with gate
It is usually combined with the barrier rails and can be supplied with either electrical or mechanical locking or both.
Foot control unit
A very good solution when you must have both hands free.
External power pack with steel cover
Provides extra protection in exposed environments. Also provides protection if there is a risk for falling objects hitting the
power pack.
Lifting eyebolts
Makes installation, transportation easier and safer. Some units requrire a larger platform. *Some units requrire a larger platform.
Turntable circular
Recessed or integrated in the lift table top. Turntable recessed into a secondary table top, fitted to the main scissor lift platform.
Turntable rectangular
Fitted on the lift table top and includes an inductive sensor to avoid trapping risks. Rectangular surface bolted to the main scissor
lift platform. The unit has safty spacing and electro-interlocked to the lift travel to reduce the risk of trapping an operator.
Roller conveyor
Roller conveyor or another conveyor type is often utilised in production systems where different levels need to be
reaced. *Always state the goods length and weight for the best solution.
Rail running chassis
Level differences in a track bound transportation system can be simply eliminated by utilising a flange wheel base frame. This equipment can be supplied with or without powered drive unit. The easiest way to cope with a difference in level in a track bound transportation system is to equip a lifting table with flanged wheels. The base can be an unpowered
bogie or can be fitted with a drive unit for self-propulsion.
Reinforced platform
Gives additional support to the table. Also includes mechanical stops in baseframe.
Tipping protection
Helps to stabilize the lift table. Minimizes the risk for the lift table to hinge upward. *Is recommended if the platform extension is over 10 %
Protective wire mesh
Protects the table from dust, dirt and debris in exposed environments.
The lift table can be enclosed in a chain mesh curtain to reduce the risk of injury or entrapment. The chain mesh curtain is also a useful protection against mechanical damage. *All protective mesh/skirts requires a table extension +150 mm LxB.
Protective skirt
The skirt are suitable for weather proofing the equipment in an outdoor environment. *All protective mesh/skirts requires a table extension +150 mm LxB.
Heavy duty execution
Fitted with additional features for tables intended for intensive operation.
Auto raising stop
Designed to prevent accidential roll off from the platform when the table starts to elevate. *Demands extension of the platform length +150mm.
Chequred aluminium platform
Non slip, non rust surface.
Mechanical locks in platform
Fotocells
Packaging
In a rigid and durable wooden casing, in order to allow multiple handling and a safe arrival of the goods. Our product packaging is also available in a “classified version“ in compliance with ISPM 15.