Pallet Levellers are simple devices that automatically maintains the top of the load at the ideal ergonomic level for manual loading and unloading. The pallet can be easily rotated for improved access to the Opposite side of the load. No permanent air connection in required. Charge the air Chamber to the correct level for your load type and that's it! You're ready for work, pallet after pallet!
The Pallet Leveller is a highly reliable automatic load leveller that provides a practical approach to faster, easier and safer loading or unloading of pallets. The Pallet Leveller is adjustable by regulating the pneumatic charge. Once set the Pallet Leveller automatically maintains the top of the load to the proper and most ideal elevation to eliminate the repetitive motion of bending, reaching and twisting; the major cause of lower back disorders.
The Pallet Leveller is best for those applications where the loads vary widely and often.
- One model - up to 2000 kg
Pneumatic actuator can be adjusted to accommodate the full range of loads to 2000 kg.
- Easy, finger adjustment
As load conditions change greatly at a workstation the pneumatic actuator can be quickly adjusted - no tools required.
- Automatic height adjustment
As the load is built up (or broken down) the top layer is maintained in the 750 to 1000 mm recommended ideal work height envelope.
- No installation required
Since the Pallet Leveller does not need to be bolted to the floor, work station arrangements can be flexible.
- Near-side loading
Pallet rotator ring for easy movement and increased stability - No walking around the pallet. Phenolic frame protector Heavy gauge full diameter sheet under rotator ring helps prevent damaged pallets from jamming.
- Rotator ring guards
Prevents fingers from being pinched under the rotator guide
- Standard fork truck pockets
Provides for safe and easy movement when the Pallet Leveller needs to be re-located.
- Simplified pneumatic system
Two air connections instead of sixteen, like some competitive models
- Full contoured legs
Maximum thickness where it is needed - at the main axle pin.
- Full width-straight axles
Increases stability
|
|
|
| Capacity: |
2000 kg |
| Platform LxW: |
1220x915mm, including fork truck pockets |
| Turntable diameter: |
1100 mm |
| Lowest height: |
242 mm |
| Total height: |
775 mm |
| Weight: |
310 kg incl. packing |
| Fork pockets: |
On 1220 mm sides of base frame |
| Power: |
Unit is filled with air to a pressure corresponding to a desired capacity. |
| Pressure gauge: |
Located next to air inlet. |
| Actuation: |
Triple convolution air bag with spring assist. Note: Spring does
not have to be changed to handle varying load weights. |