Choose language:

Raising Expectations with Edmolift Scissor Lift Tables  » Read more...
Scissor Lift This lift can be used indoors, installed in a pit or operated from the factory floor. Vertical - Double Scissor Two or three pair of scissor arms stacked on top of each other. Gives the advantage of lifting loads high above the ground. Horizontal - Double Scissor Gives the advantage of lifting heavy loads distributed over a larger work surface.	Armlift The ideal choice when working with parts in pallets or containers. Tilt Table Devices for installation on a platform or directly onto the floor. Low Profile Lift Table Because of the low closed height no pit is required. Lorry Loader Specially equipped with reinforced platforms.	Lift Trolley Robust trolleys and work platforms. Single and double scissor. Work Positioner Heavy loads – easy maneuvered with a Work Positioner. Pallet Lifter Enables heavy pallets to be lifted. Place the pallet with a fork truck. C-series Quality table to the lowest price possible – good value for money!

Single scissor lift table

The most widely used industrial lift table. These lift tables can be used both indoors, installed in a pit or operated from the factory floor.

Double scissor lift table, vertical double and triple

The double vertical scissor lift table consists of two or three pair of scissor arms stacked on top of each other. This type gives the advantage of being able to get loads high above the ground.

Scissor lift table, horizontal double

The double horizontal lift table consists of two mechanically synchronized pair of scissor arms to gain maximum stability. This type gives the advantage of being able to handle heavy loads distributed over a larger work surface.

Armlift with simultaneous lift and tilt

Position pallets, wire baskets and containers at the most comfortable working height and angle. Armlifts are the ideal choice for almost any application that involves working with parts in pallets and containers. Lift and tilt are achieved with a single mechanism making Armlifts an economical alternative to conventional tables which require separate lift and tilt mechanism. Beacuse Armlifts tilt down instead of up like most tilters they are especially well suited for use with oversized baskets and containers.

Low profile lift table

Because of the low closed height, no pit is required. Operation by controls mounted on remote power pack. The table is positioned directly onto the floor, load the platform and raise to working height.

The optional access ramp facilitates loading by pallet truck or stacker, providing even greater flexibility. With E-shaped plattform (TUB) or U-shaped platform (TUL) a pallet can be loaded directly from a hand pallet truck without ramp.

Lorry Loaders with reinforced platforms

EdmoLift Lorry Loaders are specially equipped with reinforced platforms in tear plate and six mechanical stops in the base frame to allow a truck to drive over in the closed position (wheel pressure – 4tons).

EdmoLift tilting program

Tilting devices for installation on a lift table platform or directly onto the floor. A new tilting program with many different combinations. At installation on platform the hydraulic is the same for tilting device and table. Tilting devices installed directly on the floor have a base frame and integral power pack.

Lift trolleys

Robust trolleys and work platforms. Single and double scissor, 200–300–400–500–1000 kg with foot pump or battery versions. Large, easily maneuvered wheels. The rear wheels have rotational and directional locks.

Pallet Lifters

The pallet lifter enables heavy pallets to be lifted to working heights of up to 1100 mm, and helps to speed packing and assembly jobs. Pallets are simply placed on the lift arms with a fork truck. Whenever and wherever pallets are being loaded and unloaded, jobs can be undertaken more satisfactorily with EdmoLift pallet lifters.

Work positioners

Heavy loads – easy maneuvered with a WP

Operates with loads of up to 205Kg. Weight distribution is spread evenly over all four swiveling wheels and with the unit’s short wheelbase and light self-weight the WP is the safest and most maneuverable lifter on the market! An improvement in the working environment resulting in greater profitability for your company.

• Battery charge indicator mounted centrally on the push handle in direct view
• Dual speed elevation and descent for safer, more efficient control
• Easily customised for your specific requirements – higher lift heights, wider straddles etc
• Options include: box handlers, reel handlers, barrel handlers, sack handlers etc
• Fully compliant with EN1757.1 and CE Marked
• Wide range of Accessories

The C-range – outstanding value for money

We have developed a series of lift tables that we now are proud to introduce, the C-range. We have designed these products so that production can be done to the lowest price possible. The C-range are available for immediate delivery, from stock.

EdmoLift AB
Jägaregatan 11
SE-871 42 HÄRNÖSAND

Telephone no.: +46 (0)611-837 80
Fax no.: +46 (0)611-51 15 80
E-mail: info@edmolift.se